II. Pedestrian Retracting Flap Turnstiles

Specifications:   
Dimensions: 1200×1000×300mm/47*39*11.8 inches 
Wing width: 300mm/39 inches
Cabinet material: AISI 304 stainless steel
Thickness: 1.5mm/0.06 inch thickness at top cover, 1.2mm/0.047 inch thickness at cabinet body .
Net weight: 55Kg/120Lbs
Wing material: Default is Acrylic plate(15mm/0.6 inch, 18mm/0.7inch, 20mm/0.79 inch ), or Rubber plate
Surface process: Standard stainless steel shining surface
Fingerprintless & scratch resistance surface
Power requirement: AC220V 50Hz or AC120V 60Hz
Working temperature:-30?-60?/-22?-140?
Working humidity: 5-95%
Maximum width for one passage: standard 700mm 
 
Features:
1. Built-in infrared sensors.
2. LED directional indicator.
3. Bi-directional entry function( could enter from both end ).
4. Fail safe, which means the flap (wing) will be opened when power off (or fail secure, which means the arm will be closed when power off ) .
5. Auto-close function, which means the flap (wing) will be closed after opening when legal time is over if no one pass by.
6. Anti-clamping, which means the flap (wing) will be remained opened if a people standing in the middle of the two flaps until (s)he leaves.
7. Tail-after alarm (customized, using infrared detector)
Notice, the interval of two objects passing through should exceed 1 second(default) otherwise the gate would regard these two objects as one object. 
Tail-after alarm default time could only be set up in factory. 
8. Wrong direction entering alarm, which means gate will alarm if a person tries to enter from the direction which having no legal access request being approved.
 
Note: when the facility is installed outside, please make sure a concrete base foot of 200 mm height for anti-humidity, furthermore, a shelf should be overhead constructed for anti-sunshine. Naked installation in the open environment is strictly forbidden.

Passage A (separate lane) 

 
Passage B (multiple lanes) 

The gap between two flaps is adjustable, recommending 20mm. the default cabinet & flap width is 300mm, and could be widen to 350mm for wider lane, such as handicap lane.

Widely applied to shopping malls, railway stations, subways, pedestrian passages etc.